Go to Top
flowtel

ACRYLIC BODY ROTAMETER page two

ACRYLIC BODY ROTAMETER

Acrylic tubes are also used in some rotameter designs due to their lower cost and high impact strength. They are typically constructed of acrylic, with either metal or plastic end fittings. With plastic end fittings, care must be taken in installation, not to distort the threads. Rotameters with all plastic construction are available for applications where metal wetted parts cannot be tolerated, such as with deionized water or corrosives fluids.

SPECIFICATIONS SERIES FL-C

Meter Body Acrylic
Float SS 316, PTFE, PVC etc.
Wetted Parts SS, PVC, P.P, PTFE etc.
O-Rings Neoprene, PTFE Silicon etc.
Scale Engraved on Body
Temp. Rating 60°C
Connection Flanged Or Threaded
Accuracy of Model 10 & 20 ±3%
Full Scale Model 30, 40, 50 & 60 ±2%Model 70, 80, 90, 100, 110 & 120 ±2%
Repeatibility 0.5%
Rangeability 10:1
Higher Pressure rating on request

MODEL FL-C MODEL & RANGES

Model FL-A/FL-B AIR LPM WATER LPH Pressure
Water LPH
Maximum
FLC 10 0.1-1 0.4-5 3 Kg/Cm2
1-10 1-10
2-20 3-30
3-30 4-50
5-50 10-100
FLC 20 15-150 20-250
FLC 30 50-500 50-500
FLC 40 60-600 120-1200 7 Kg/Cm2
FLC 50 150-1500 240-2400
FLC 60 250-2500 600-6000
FLC 70 300-3000 800-8000 12 Kg/Cm2
FLC 80 800-8000 1500-15000
FLC 90 NA 2000-20000 18 Kg/Cm2
FLC 100 NA 400-40000
FLC 110 NA 5000-50000
FLC 120 NA 8000-80000
fff

SPECIAL SIZES & RANGES ON REQUEST

Model FL-C A B C D ConnectionBSP’F’ Flange
10 190 —- 28 150 ¼”
20 190 —- 32 150 ¼”& ½”
30 240 —- 28 195 ¼”
40 250 275 35 180 ½”
50 250 275 42 180 ¾”
60 300 325 55 230 1”& 1½”
70 400 450 60 320 1”& 1½”
80/90 400 450 70 320 1½”& 2”
100 —- 450 85 320 2”& 2½
110 —- 450 100 320 2 ½”& 3”
120 —- 450 100 320 4”& 8”